NASA Payload Safety Program Reference Documents
**Contact Payload Safety Program for reference documents not listed or accessible.**
| NASA Documents |
| NPR 8715.3 | NASA General Safety Program Requirements |
| NPR 8715.5 | Range Flight Safety Program |
| NPR 8715.7 | Expendable Launch Vehicle (ELV) Payload Safety Program |
| NPR 7120.5 | NASA Space Flight Program and Project Management Requirements |
| NPR 8000.4 | Agency Risk Management Procedural Requirements |
| NPR 8705.4 | Risk Classification for NASA Payloads |
| NPR 7150.2 | NASA Software Engineering Requirements |
| NPR 7120.8 | NASA Research and Technology Program and Project Management Requirements |
| NPR 8621.1 | NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, Recordkeeping |
| KTI-5210 | Material Selection List for Oxygen Service |
| KTI-5212 | Material Selection List for Plastic Films, Foams and Adhesive Tapes |
| KSC-GP-425 | Fluid Fitting Engineering Standards |
| KSC-SPEC-Z-0008 | Fabrication and Installation of Flared Tube Assemblies and Installation of Fittings and Fitting Assemblies, Specification for |
| KSC-SPEC-Z-0007 | Tubing, Steel, Corrosion Resistant Types 304 and 316, Seamless, Annealed, Specification for |
| NASA-SPEC-5022 | NASA Manufacturing and Test Requirements for Normally Closed Pyrovalves for Hazardous Flight Systems Applications |
| NASA-STD-4003 | Electrical Bonding for NASA Launch Vehicles, Spacecraft, Payloads, and Flight Equipment |
| NASA-STD-5005 | Standard for the Design and Fabrication to Ground Support Equipment |
| NASA-STD-5006 | General Welding Requirements for Aerospace Materials |
| NASA-STD-5009 | Nondestructive Evaluation Requirements for Fracture Critical Metallic Components |
| NASA-STD-5008 | Protective Coating of Carbon Steel, Stainless Steel, and Aluminum on Launch Structures, Facilities, and Ground Support Equipment |
| NASA-STD-6001 | Flammability, Offgassing, and Compatability Requirements and Test Procedures |
| NASA-STD-8719.11 | Safety Standard for Fire Protection |
| NASA-STD-8719.14 | Process for Limiting Orbital Debris |
| NASA-STD-8719.13 | NASA Software Safety Standard |
| NASA-STD-8719.9 | Lifting Standard |
| NASA-STD-8719.12 | Safety Standard for Explosives, Propellants, and Pyrotechnics |
| MSFC-STD-3029 | Guidelines for the Selection of Metallic Materials for Stress Corrosion Cracking Resistance in Sodium Chloride Enviornments Materials, Processes, and Manufacturing Department Metallic Materials and Processes Group |
| Air Force/DOD Documents |
| MIL-HDBK-6870 | Department of Defense Handbook: Inspection Program Requirements Non-Destructive for Aircraft and Missile Materials and Parts |
| MIL-HDBK-454 | Military Handbook: General Guidelines for Electronic Equipment |
| MIL-HDBK-729 | Military Standardization Handbook: Corrosion and Corrosion Prevention Metals |
| MIL-STD-1540 | Department Of Defense Standard Practice: Product Verification Requirements for, Launch, Upper Stage, and Space Vehicles |
| MIL-STD-1576 | Military Standard: Electroexplosive Subsystem Safety Requirements and Test Methods for Space Systems |
| MIL-STD-882C | Military Standard: System Safety Program Requirements |
| Industry Documents |
| **Contact Payload Safety Program for reference documents not listed or accessible.** |
| (ASNT) SNT TC-1A | Recommended Practice No. SNT-TC-1A, 2016 Edition, and ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel |
| ASME B30.9 | Slings |
| ANSI Z136.1 | American National Standards for Safe Use of Lasers |
| ANSI/ASME B40.1 | Gauges – Pressure Indicating Dial Type – Elastic Element |
| ASME B31.3 | Process Piping Guide |
| ASTM A269 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing |
| IEEE/EIA 12207 | Information Technology – Software Life Cycle Process |
| AWS D17.1 | Specification for Fusion Welding for Aerospace Applications |
| AIA/NAS 1514 | Radiographic Standard for Classification of Fusion Weld Discontinuities |